Hello I am new to VSS i have been through the configuration and features of VSS. I have an experience of configuring VSS on 4500-X switches. Configuration was pretty straight and good. But i want to know what is the advantage in configuring HSRP whe...
HiI am planning to migrate my Active passive links to Active Active links with a link load balancer. But the firewalls which are behind routers are planned to be in Acive-Passive.Can we understand how the firewall will respond for the response traffi...
Hi I am trying to understand if this is possible in any way as this is one of my upcoming project requirement. I need to have two nat rules for a connection. Say i would NAT source in one nat rule and would nat destination in other one.
Hi ,I presently have 4507R switch model with IOS 12.2(54)SG1 We are observing many ports of one slot speed going down suddenly.Please let me know if any trouble shooting steps .
Hi Following is the TCL script i wrote to log show commands wonder why i couldnt see the output. Please let me know if there are any changes to be done.package require Expectspawn telnet 10.1.2.12expect "Username:"exp_send "user\r"expect "Password:"...
MarvinThanks i couldnt reply in time. My issue has been resolved. The problem was host scan image. User was not using the desired version. However i did not find that in that log.
Hello Marvin, I had similar kind of issue reported. I do not have DAP with Network ACL being blocked for the reported Users, however i still have few users reporting this kind of issue. While the others are working good. Do you still see this as DAP ...
Hi Mon,You can achive this with VLAN configuration , All you have to do is create 4 VLAN and configure the ports to respective VLAN. And you have to configure VLAN-ACL to stop Inter-VLAN communicationAs you said only one segment should be communicati...
Hi Not sure how you are saying the interface is not up. Can you check the show interface status of the VLAN.Also suggest you to have atleast a interface assigned to this VLAN