Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have been able to use TCL IVR application to send a SIP SUBSCRIBE to a SIP proxy on an IMS for SIP registration events and see the proxy return a 200 OK followed by a NOTIFY using debug ccsip messages. But so far I have been unable to get my TCL I...
Hi,I am trying to use TCL IVR to get my 2431/2921 VGWs to Subscribe to SIP registration events after successfully Registering with the SIP Proxy on our IMS system. Currently the VGW SIP stack does not support Subscribe/Notify for reg in native IOS ...
I need to write a tcl ivr application to validate a received redirecting number against a list of 1000 valid RNIEs provisioned. I have found a few examples I can study, but I just found how to display on a 2431 the list of built-in scripts below fro...
I am trying to configure BFD for static routing on a 2431 running IOS 15.1(2)T to detect and route around simple multihoming faults. According to Cisco Feature Navigator, BFD for static routes is supported on c2430-ik9o3s-mz.151-2.T.bin. But when I...
We have a need to add SIP SUBSCRIBE/NOTIFY messaging for SIP Registration events not supported in our current ISDN PRI to SIP+VoIP gateway on IAD2431 and ISR2921 IOS voice gateways (VGW). When a provisioning change is made to the VGW's IMS account, ...
Does this mean that Cisco does not support the use of the C-Scripts by customers? If so, why do they appear in customer-facing displays like show call application?
Sorry, but I found a typograhical error that was the cause. I typed BackSecs as Backsecs in one of my global statements. I deleted my comment after I found the typo, but I guess you saw my comment before I erased it.Thanks.
You may be able to use either SNMP or CLI commands to monitor a trunk, but I am not familiar enough with CUBE to say for sure. SNMP is attractive, because EEM can go some of the work by polling the SNMP OID(s) and starting up an EEM script or applet...
I just googled 'eem applet reboot' and the 2nd result was:
Cisco – how to schedule an unattended reload with EEM – yurisk.info
yurisk.info/2011/06/22/cisco-how-to-schedule-an-unattended-reload-with-eem/
Cisco – how to schedule an unattended r...
