Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
we are monitoring a new customer with a cluster of 3 DNAC. Now we found out that there is another service provider in the path from our monitoring tool to the dnac servers. Since we get no anser for ping/traceroute/SNMP poll/ http get we assume there...
How can I find the uptime of an APIC node?We had to shutdown 2 APIC's in a fabric for electrical works. I insisteed that I should be informed when the power is back to normal, but as it was ...So can i find anything in the log's? or on the CLI?
Hi thereIt seems that Cisco is falling behind schedule.Currently I'm looking for study material for the 700-702 certification "ACI for System Engineers (ACISE)".Unfortunately the only thing I can find is an instructor lead "boot camp" in Bloomington,...
A customer runs a 5508 WLC for quit a while. several dozens AP's are spread all over Europe an run just fine. All the AP's have a VPN based connection over an MPLS service provider, so we are using 10.x.x.x addresses only.We have upgraded to release ...
This happens at our customers on almost regular basis ise-001/admin(config)# no snmp-server enableise-001/admin(config)# snmp-server enable and everything works fineagainfor a couple of weeksIt's kind anoying
First: All Cisco appliances run on a version of Linux (CUCM, IOS, IOS-NX, ...). Now the new IOx on the ISR C9xx even run a hipervisor based on Linux to support VM's based on Linux. So there is quit some Linux know-how available in Cisco.Second: The p...
Hi Fraser Have a look athttp://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/42782-channelusage42782.html#topic1 RegardsWolfgang
Hello LeahTwo questions to your document- how do you configure the SCCP supported port on the CUCM?- is it possible to do add a voice recording to this port? Many thanksWolfgang
Unfortunately the Call Forwarding Unregistered does not work in my CUCM 9.1 environment!When configured - the caller gets a fast busy tone (5 times only) and the call is dropped. Any suggestions?Thank youWolfgang
