Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Any one out there got a config that will allow me to replicate an SIP service provider in a voice Lab.We are rolling out multiple CME's to locations across the US and need to prconfigure and test them.What we need to test them is to have a second CME...
Hi all, Looking for some assistance in configuring a Cisco 1130 AP (autonomous) to a 1861 router.I am struggling to work out how to connect this and get it working.Router has 2 vlans, VOICE and DATA. All switch ports configured for access vlan (DATA)...
Hi All,Does anybody have any pointers on getting a CUCM 7.1 cluster talking to a Tandberg MXP 3000 via SIP.We have separate ISDN Bri for our Tandberg and want to get rid of them and pass voice only calls via call manager and a 2821 gateway router wit...
Can anyone out there help me.I have configured a 2851 at home for 6 IP phones with voice mail on the installed CUE module.I have a 4 port analog FX module and I want to be able to dial outbound for all numbers via port 0/0 and all inbound calls to th...
Hi All,Can anyone give me any help regarding the configuration of an Auto Attendant Call Handler and the steps required to achieve the following:-Call comes in to Main Site NumberCUCM (7.1.5) routes to Unity ConnectionAA answers the call and gives an...
CME A --------SIP Trunk--------CME B CME A is our site with a sip trunk to SIP provider.30 DDI and 25 Handsets - 617.588.2900 to 2929Outbound Calls to Emergency ServicesLocalNationalInternational (UK)CellPhonesCME B 3 x 7971Each line configured to re...
I understand that the SIP side of things is Provider dependant.What I am after is a config that will allow me to replicate multiple endpoints so that we can make test calls from the CME to endpoints that are replicating external phone numbers.
Hi All,Apologies if this sounds like the wrong thing to say on a Cisco Support forum, many people have so far asked if the ASA can do this and that and mostly the answer seems to be no.Do we all think cisco trying hard enough to raise the profile of ...
Already had a case open with TAC and provided config and captures.Took so long that we had to put a workround in and it difficult to replicate now.TAC case SR 617830879 - We would like to see if their is a resolution to this issue so we can take out...
