Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The AP was paired with the wrong conroller and now I am unable to pair it with the correct controller. I have went through the process of holding in the Mode button while connecting it to power but it appears to still be looking for the other control...
I recently changed jobs and at the new location we are primarily running Catalyst 2960G series switches with the exception of one 3750. All of the switches are setup in a cluster with the 3750 being the cluster master. My question is what is the bene...
We recently upgraded our bandwidth and I have to change the ip address on our ASA 5510. I just want to make sure that I am doing it right. All I will need to do is open up the ASDM and under confiugration go to interfaces and make the needed changes ...
@divp wrote:
Hi,
Please run the below commands on the AP console:
debug capwap console cli
test capwap erase
And then check whether the AP joins to the right Controller. Ensure that the DHCP option 43 or DNS provides the correct WLC mgmt IP.
...
