About shawnangelo

shawnangelo · 01-16-2012

I am trying to determine wether a 2911 ISR is a G2 or not.show inventory:NAME: "CISCO2911/K9 chassis", DESCR: "CISCO2911/K9 chassis"PID: CISCO2911/K9 , VID: V02 , SN: FTX1440A20Zdoes "V02" indicate that it is a G2?show hardware:Cisco CISCO2911/K...

shawnangelo · 04-18-2016

Sorry I just reread this and forgot you were referring to IP dialing only, not SIP URI Dialing including the IP address. In this case you could create a SIP Route Pattern for info@!*!*!*! and pass that to the VCS-C or Expresway-C B2B SIP Trunk. At ...

shawnangelo · 04-18-2016

It does work using PAT as ctcahoe described below. Also, in the latest Jabber Guest OS Update, it is no longer required to use PAT as you can add the correct port number in the "Set Domain Used for Links" configuration. http://www.cisco.com/c/en/us...

shawnangelo · 04-18-2016

Try this. On CUCM Add New SIP Route Pattern Pattern Usage=Domain Routing IPv4Pattern=ip Set route partition according to your dial plan Set route list to the B2B SIP Trunk Configured for Expressway (or route list if you are using that) On Expressway...

shawnangelo · 04-18-2016

What specifically do you mean by "AD-mode". TMS Server being joined to domain, or TMS serer using AD for authentication? Or both? Can you provide the exact excerpt from the guide you are referring to?

shawnangelo · 01-25-2016

Is CFB registered in UCM? Are involved endpoints using MRGL that CFB is assigned to? Are screen licenses available on TS? You can check status in Conductor and TS to see available resources for that conference. If you can post those and config detai...

Member Since	‎02-26-2009 11:27 PM
Date Last Visited	‎02-17-2020 07:35 AM
Posts	106
Total Helpful Votes Received	14

User Statistics

User Activity

Determing Generation of ISR (G2?)

Sorry I just reread this and

It does work using PAT as

Try this.

What specifically do you mean

Is CFB registered in UCM? Are