Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I want to create a paging group with Algo SIP Horns listed as supported devices. Do you think this can be done? I see the notice that "Paging groups only work with the Cisco IP Phone 6800, 7800, or 8800 Series, as well as Analog Telephone Adapters (...
Hello, my name is Mark Sparling and I work for FirstLight Fiber and before that Ingram Micro for 12 years. I have using Meraki since Cisco has acquired them. These communities are always good places to bounce the oddball questions out to.
Setting up the On-Demand live recording feature in CUC. Instead of have to perform the action of Conference/Extenion/Conference. What to program a button to perform that action, was told you can do this. How do you do this?
Cisco has some new licensing under the CUBE section anyone knows the difference between the "CUBE - 1 Standard Trunk Session License vs CUBE - 1 Standard Line Session License vs Classic CUBE example FL-CUBEE-5" I have heard there is a new ordering g...
From what it looks like with the **new** Catalyst 9300x series, not the non-x series has the hardware support for IPsec VPN - https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/nb-06-cat9300-ser-data-sheet-cte-en...
You are right those modules aren't supported on that line card. You can try the unsupported modules command but it might not work and then your only options is new line card or GLC-SX-MM= modules. Quick question the 7962 IP phone has copper port or...
under the GUI and the click on Port Setting then click on the port you are having problems on is Auto Negotiation checked for all three switches and you are using CAT5e or higher cable? I know these are dump/beginner questions but just have to start...
What line card & SUP are you using in your Catalyst 4506?
WS-X4748-SFP-EWS-X4724-SFP-EWS-X4712-SFP-E
GLC-GE-100FX
15.2(1)E
WS-X4640-CSFP-EWS-X4624-SFP-EWS-X4612-SFP-E
GLC-GE-100FX
15.1(1)SG
The 1602e isn't outdoor rated APs, but the antenna you would want to use for bridging and you have line of sight would be AIR-ANT2566P4W-R Qty1 per AP. Please remember the antennas need to be hight enough so you don't zap people in the head. Please ...