About Victor Bidnenko

Victor Bidnenko · 09-02-2020

Is there any chance that cisco releases a new cimc version until end of 2020? I am trying to guess will I still can access my server CIMC after the end of support with old versions of browsers?

Victor Bidnenko · 05-23-2016

We have CUCM 9.1.2 and mediasense 11.0.1 applications configured with this guide http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/mediasense/11/User_Guide/CUMS_BK_M5B01864_00_ms-user-guide-11/CUMS_BK_M5B01864_00_ms-user-...

Victor Bidnenko · 03-29-2016

Our 7965 phone constantly shows in console log dhcp warning: 2146: WRN 10:43:47.341105 DHCP: dhcpValidateIP(): invalid ip 0x02147: WRN 10:43:47.341806 DHCP: dhcpValidateIP(): invalid ip 0x02148: WRN 10:43:47.342036 DHCP: dhcpValidateIP(): invalid ip...

Victor Bidnenko · 03-11-2016

We have 2960x switch (WS-C2960X-48LPS-L 15.0(2)EX4 C2960X-UNIVERSALK9-M) and have configured on access ports port-security, ip source guard (IPSG) and also DAI and DHCP snooping enabled globaly on switch. The problem is that when we configure the ...

Victor Bidnenko · 11-26-2014

Is there any possibility to change Set_Status_Inactive_Timeout for IOS clients to 60 min or to disable it with jabber-config.xml file? I've changed Set_Status_Inactive_Timeout option but int take no effect. After user log in to device the Set_Status_...

Victor Bidnenko · 06-05-2019

Actually no debug was taken, but it looks rather simple - two devices are inserted in one port (phone+pc). When pc is turned off it releases address and switch thinks no device have got an ip in dhcp dhcp database (actually the phone has but maybe it...

Victor Bidnenko · 09-08-2017

DHCP-snooping was the problem. Did not solved the problem but used a workaround by setting the voice vlan config line to the port.

Victor Bidnenko · 09-30-2016

Yes. It was working well. When you listen to recording it splits the sound into two channels - each channel in a separate earpiece (I was using headphones but only one earpiece was working). I changed the headphones and all was fine. It is just the ...

Victor Bidnenko · 03-21-2016

Our current config Our current snmp-server is disabled and maybe in case of comand "ip verify source port-security" switch sends alerts to snmp server but it cannot be reach. But actually it would be strange... Logging: logging trap debugginglogging...

Victor Bidnenko · 04-08-2015

One more trick to reset this - for me the reset worked only when the device booted and get its fallback ip of 192.168.1.245. Then pressed-and-hold the Reset button with a bent paperclip for more than 10 secs at this time the device turned of all ligh...

Member Since	‎03-18-2014 01:04 AM
Date Last Visited	‎01-25-2021 12:52 AM
Posts	22

User Statistics

User Activity

CSCvs11682 - C220/C240 M3 server need HTML5 support for CIMC webUI

Cisco Mediasense records one way audio

IP Phone CP-7965G dhcp warning

Port-security is not sending snmp messages on 2960x with ip source guard port-sec enabled

Jabber-config for IOS devices - Set_Status_Inactive_Timeout option \ chat problem

Re: IP Phone CP-7965G dhcp warning

Re: IP Phone CP-7965G dhcp warning

Yes. It was working well.

Our current config

One more trick to reset this