Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are using PrimeNCS (soon upgrading to Inf. 2.0) as a Multitenent Management for out Schools. I add their individual email addresses in the Domain setup. but, I have no idea how to dedicate notification email (AP Down messages etc..) on a per Domai...
We are using PrimeNCS (soon upgrading to Inf. 2.0) as a Multitenent Management for out Schools. I add their individual email addresses in the Domain setup. but, I have no idea how to dedicate notification email (AP Down messages etc..) on a per Domai...
Hi Everyone, I have a few required QoS settings for a Voice system between two buildings being routed. (static)I have QoS training coming up but, I just need to know what I have to have to put the basic QoS settings on each edge switch with Static ro...
Good Afternoon All,We use a WISM2 Controller for our "Flexconnect" deployment out to our Districts. We started usingthe Domain feature to allow our districts to manage their own domain. Create Guest users, Rename AP's etc.When we used Cisco WCS, We a...
Hi All,I've been working with ACL's for a while and needed to filter some iTunes share traffic on a specific VLANI assume VACL's will work for me. So, I created the following but it doesn't seem to be working.Can I get some assistance on this from an...
Using Jabber version Version 14.0.0.55549 Build 305549 and I've tried the ordering of speakers but it doesn't help. This happens on any bluetooth devices I have. I've tested with my BOSE Bluetooth and when I get a Jabber message, it kicks them off an...
Hi Pieterh, Okay so that's asking for the radio count. its calculating the Antenna Gain = (# radios) x 0.5 dBi Sorry for my ignorance. This is quite a confusing parameter in the WLC as I have looked all over documentation and states very little abou...
pieterh. I have 2 x 1562E AP's. One is the RootAP and the other is MeshAP mode to create a bridge. Each uses a single AIR-ANT5114P2M-N external antenna which have 14 dbi gain. Using your info below. 2.4GHz: 2dBi -> 4x0.5dBi5GHz: 4dBi -> 8x0.5dBi My ...
I wanted to post this for anyone with 9300 switches for Guest shell to work:this worked for me. Enable Right-to-use license for app-hosting (this is required) and reboot switch Switch(config)#license right-to-use activate addon dna-advantage subscrip...
Hi Leah,You are correct, but it has differences. Unlike IAP's which can scale to 50+, the WAP's are considered "SMB" with a 16 per cluster limit. the IAP's ability to be converted to Controller based management and it's redundancy built in are also b...
