About Frank Mittrup

Frank Mittrup · 03-08-2021

Hi all,my CUBE is sitting between S4B and PSTN and I'm struggling with call-forward. PSTN is expecting the internal number in the PAI header for authentication. We now enabled call-history at the MS site and I do receive a History-Info Header with th...

Frank Mittrup · 02-05-2020

Just trying to setup a CSR 1000v as a vCUBE on a MAC with VMware Fusion 10.1.6. Yes, it's unsupported but there are many how to's around and it actually works with 16.06.07. If I'm jumping to 16.09.05 and above there are just no interfaces appearing ...

Frank Mittrup · 08-08-2018

Hi all, I'm confused by the question if the connector host can be co-located or not? I try to setup hybrid calling at a customer running a redundant Expressway Cluster for MRA. Using the wizard Expressway does grey out Connector Host is selecting M...

Frank Mittrup · 04-26-2018

Hi all, as my SIP SP can't help, I try to discuss the issue here. Problem is, that on outbound calls the BYE from the PSTN is not accepted by CUBE with the error "SIP Message incomplete, trashed". BYE for inbound calls does work. Effect is, that the...

Frank Mittrup · 04-20-2018

Hi all, I'm working on a new SRST configuration with E1 to the provider and SIP towads CUCM with +E164 DN. Here in the past we used COR list to avoid wrong dial-peer matching. Now, with the new dial-peer group feature this might be more elegant but...

Frank Mittrup · 03-09-2021

Hi Roger, Tony, thanks a lot in supporting me here! As I have a + in front of my number, this fixed length string does workrule 1 request INVITE peer-header sip HISTORY-INFO copy "<sip:(\+.............)@" u07 rule 2 request INVITE sip-header P-Assert...

Frank Mittrup · 03-09-2021

Hi Roger,the SIP-Profile Test Tool does not work for me today as well.Cisco has failed to process your data, Cisco engineers have been notifiedBut here the full picture:voice class sip-profiles 700rule 1 request INVITE peer-header sip From copy "sip:...

Frank Mittrup · 02-05-2020

Reading through the web I found the solution: On an external page I found the information, that Cisco does not support E1000 NIC's anymore:https://success.ilandcloud.com/articles/cisco-csr-1000v-upgrade-guide"If your CSR has VMware E1000 NICs attache...

Frank Mittrup · 11-07-2019

Hi Jaime,pretty old thread but just stuck on the same issue.I do understand your point with Jabber running as a softphone. But we are running Jabber in CTI-Mode. Would expect that we can use the same XMPP Desktop share like in group chats during an a...

Frank Mittrup · 09-21-2018

Hi Oswaldo,that worked for me. Thanks, for the answer.Frank

Member Since	‎07-06-2010 05:38 AM
Date Last Visited	‎03-19-2026 04:54 AM
Posts	37
Total Helpful Votes Received	23

User Statistics

User Activity

SIP-Profile copy with two @ in the History-Info Header

CSR 1000v for Lab on VMware Fusion

Expressway Connector Host co-located?

CUBE does not forward BYE from SIP SP on outbound calls

SRST and dial-peer groups (dpg)

Re: SIP-Profile copy with two @ in the History-Info Header

Re: SIP-Profile copy with two @ in the History-Info Header

Re: CSR 1000v for Lab on VMware Fusion

Re: What you're attempting to do

Re: First you need fullfilled the