Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Will the NME-WLC8-K9 work on the Cisco 3725? Will there be a problem if there is a L3 switch between the router where the NME-WLC8 is plugged in and the L2 switches where the LAPs are connected?
A client has an 1841 router with two ISPs connected to it and is doing IP SLA for redundancy.A Linux mail server (Postfix) is NATted to one of the ISP using the following command:ip nat inside source static tcp 123.4.5.6 25 192.168.9.10 25 extendabl...
There's a page on the 4800 about "Tip". What is it and how does it relate to the config on the 1200?Here's an excerpt of the 4800's config:Aironet AP4800E V8.24 warehouse10 - ...
I have a dilemma with one of my client. It's a newly deployed CME system with an E1R2 connection to the telco.Now the E1R2 config on the router is fairly basic and this config has been known to work with other carriers. But for this particular carrie...
I have a 2851 router with two WAN links to two different ISPs. There is one LAN subnet that's on a private IP range and is using dynamic NAT (overload) to connect to either ISPs.I have gone as far as configuring NAT and reliable static route but are ...
Appreciate the response.The IOS is 12.4(15)T or T1. Not 100% sure.Here's an excerpt of the config:======================================!controller E1 0/0/0 framing NO-CRC4 ds0-group 1 timeslots 1-15 type r2-digital r2-compelled ani ds0-group 2 time...
I hope you guys don't mind me reviving an old thread. My original query is in http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=WAN%2C%20Routing%20and%20Switching&CommCmd=MB%3Fcmd%3Ddisplay_location%26loc...
