About dselfridge

dselfridge · 04-08-2019

We're about to deploy Cisco ISE to a customer site and they have asked the question..."Will ISE work with a Group Managed Service Account? These are service accounts that have their passwords changed periodically."Now, I'm assuming that if the pas...

dselfridge · 03-08-2016

I re-imaged the box, after a hardware failure during an attempted upgrade. (3315 appliance) Getting the error 'restore failed: Wrong encryption key or corrupted download from repository' I've tried repo's based on FTP and local disk. all fail. I've a...

dselfridge · 07-15-2015

Hi, My customer has banned TFTP from the network. Not a problem, I just use FTP. This works for most file operations on the controller (Software Upgrades, Config backups, etc.). However, to increase the AP count, which the customer does repeatedly wh...

dselfridge · 09-25-2013

Hi,My customer is running 5508's with AP groups.So that new AP's don't transmit the SSID's before I'm ready, I've enabled the 'Out-of-box' feature, which places the AP's into a new group, which is system configured with the radios ...

dselfridge · 02-18-2013

Hi,I currently have a typical Guest solution setup with an Anchor 5508 in the DMZ. The client IP Addresses are supplied from the DHCP server on board the Anchor WLC. SSID 'guest'. The foreign controllers are all 2504's.All controllers are running ver...

dselfridge · 04-30-2021

I think I am hitting this bug as well. Upgraded from 2.7 to 3.0.0.458 and patched to level 2.I wondered if ISE 3.0 was still too 'new' to upgrade to. But my customer wants agentless posture which only 3.0 can do.I can't access the licencing page and ...

dselfridge · 07-03-2020

I'm looking to do the same thing, only I'm replacing a customers existing Bridge link based on the older BR1300 models That I installed some 15 years ago and has only now just failed.Here is a great link on how to do it with 1562's...https://www.cisc...

dselfridge · 08-02-2018

Thank you Dino, Very Helpful. My question around hostnames could have been a bit clearer. What I meant was that the 2 authentication methods (Corporate EAP and Guest Web-Auth) are on different domains and each has certificates to match those. e.g. ...

dselfridge · 02-22-2018

I have a similar problem, although my 2 clusters are in the same sites. One is providing guest portal functionality (2 nodes cluster) and the other is doing the EAP for the 'internal' clients (again 2 nodes) I want to merge the 2 into one, 4 node clu...

dselfridge · 03-16-2017

Nope. 5508's are on 8.0.130.0 currently. Still only TFTP. We are just benching up a complete WLAN Refresh based on 5520's, which has a better way of doing the licencing, (No reboots required, RTU, Cisco ONE model). But we plan to recycle the 5508's a...

Member Since	‎01-31-2003 08:50 AM
Date Last Visited	‎10-08-2024 12:45 AM
Posts	73
Total Helpful Votes Received	25

User Statistics

User Activity

Cisco ISE - AD & Group Managed Service accounts

After ISE 1.2.1 upgrade to 1.4 - I cannot restore the Backup file

Installing AP 'Adder' Licenses on a 5508 using FTP - Is this possible??

How to Re-enable radios after moving AP's from 'Out-of-Box' AP Group?

2 guest WLANs using the same interface but with different security methods

Re: Cisco ISE PIC does't loading license page after new install.

Re: AirOnet 1562 as a bridge

Re: [ASK] making cisco ise from 2 different deployment site into 1 cluster

Re: [ASK] making cisco ise from 2 different deployment site into 1 cluster

Nope. 5508's are on 8.0.130.0