Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
What do I need to do to make VSS work, I have the following switches with the following IOS, but am not sure if they can do it.Cisco 6509: s72033-adventerprisek9-mz.151-1.SYthanks in advance
Hello gurus,I have a CUCM v 7.1.3 with a cisco 2851 as the voice gateway.Right now we cannot receive calls to the office but we can dial out.I know I do not have the right configs...quite frankly, I do not know how to do it.I want to map our pilot nu...
I wanted to ask a few questions with respect to the above.We currently have a tandberg VCS installed and we want to integrate it with our current CUCM.I wanted to know if I can use the existing Voice Gateway Router for the Video calls and whether I c...
hello guys,I am having an issue with one of my routers which is complaining of memory fragmentation.to make matters worse its our internet edge router, it runs NAT and we are proposing running webvpn on it.don't know what the problem is, but we have ...
The primary aim is to make video conference calls outside the organizationthe secondary aim is to make voice calls to other IP Phones in the organization.I wanted to know if I can use the same E1 provided for voice for videowould be grateful if answe...
Thanks Kaja,But I still do not see how I will route the call directly to a DN.I am not using DID by the way as the E1 number provided by the telco makes use of the last three digits and the range of extension in house is four digits.Is there still...
Thanks Kaja,But I still do not see how I will route the call directly to a DN.I am not using DID by the way as the E1 number provided by the telco makes use of the last three digits and the range of extension in house is four digits.Is there still so...
