If webex is used in ubuntu 24.04 there's an apparmor error logged like this:
audit: type=1400 audit(1713968367.781:343): apparmor="DENIED" operation="capable" class="cap" profile="unprivileged_userns" pid=10844 comm="CiscoCollabHost" capability=21 c...
Hi, It's nice that Expressway supports certification renewal with ACME / Let's encrypt. Sadly even the current 12.5.5 is still using ACMEv1. This is an old version and is being replaced with ACMEv2 since 2018.I've just had an issue where ACMEv1 didn'...
Hi, I'm currently running a 1905 with IOS 15.3(3)M3 that has a IPv6 tunnel. This tunnel is provided by sixxs and needs a heartbeat to work, since I don't have a static IPv4. There is a TCL implementation of this heartbeat signal which is in fact a ve...
Hi,I'm currently running a 2911 with POE PSU and a EHWIC-D-8ESG-P to support my phones. But I don't get IPv6 to work 100%.IPv4 Looks fine.IPv6 ping from router to everything is fine.IPv6 ping from device connected to switch module to other device on ...
I can't get the Communications Manager 7.1 DVD to install on my 7825I4. No problem on a 7825I3...It's always saying something about a "HW type [Vendor/Product] NOT SUPPORTED"After looking at the HCL it should be supported...Who is wrong, installer ...
The procedure is not TAC supported as it's not documented in any cisco guide, sure. Making a upgrade iso bootable also isn't.But I do not see why it should render the system ineligible for TAC support. If correctly done, it leaves the system in the e...
Hi, tried to do the same (upgrade 14SU3 to 15SU1) and upgrade failed for me - logs pointing at ext3 and swap in the upgrade log.Since backup+restore of the whole cluster is quite time-consuming I went another route. I updated ext3 to ext4 and increas...
I have this issue with PCD and sadly the cop from the bugfix doesn't install on PCD: "This COP installation is not applicable for ucmap."
Seems like a bug in a patch to me.
I have no solution, only a workaround: reinstall PCD to older version, instal...
Hi,
sorry for the necro but this is still high on google for "logged out (default) profile information" and I just found out a practical use for it: BLF presence.
Without setting a user-id in this field, the profile loaded fine, but couldn't subscr...
Stefan, that blogpost helped a lot - thanks!
Just in case someone finds this and needs the a UI password reset, too - like I did.
Follow this guide:
1) Login on the CLI via SSH, admin user
2) become superuser (root password):
su -
3) find the doc...
