Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I currently have this open with TAC via SR 687172665, but they have been unable to dedicate time to this issue over the last few days.I may requeue it this weekend, but have tried to be patient to get the best answers.We are currently using SPAN reco...
I have a new Sales department and they want to be able to call 6 different areas, in which we have a local presence, and have a local number show up for Caller ID and return calls. I have setup a separate Partition and CSS for these users...
I am adding a SIP trunk at our main site for overflow from PRI, in order to offer Softphone features to our employees who work remotely. The SIP trunk terminates on our MPLS connection existing on a separate router from my MGCP Gateway. B...
I'm at a loss here, so any assistance will be very much appreciated. I'll do my best to describe the scenario:TopologySoftphone -> SSL VPN -> ASA 5510 -> Cisco 4507 CORE -> Cisco 2821 MPLS Router -> MPLS Network -> Cisco 2811 H.323 Gatewa...
Hey all, I recently upgraded the image files in our ASA 5510 (v 8.2) for the newest AnyConnect clients for Mac and Windows. I also uploaded the proper csd and hostscan images. Package files used:csd_3.6.6203-k9.pkghostscan_3.0.08066-k9.pkganyconnect-...
Thanks Graham.Currently, I'm testing with a softphone trying to get this working and then will bring in the LCP/RCP Port variable.The reason I asked about the Calabrio server is because I am connecting to my CUBE SIP CTI Service, which has cubeservic...
Thanks Graham. I'll try that and report back tomorrow.Question: The Calabrio service is the CUBE SIP CTI Service, right? I have the CUBE Recording profile setup to use the CUCM SIP Trunk to the CUBE SIP CTI Service on my Calabrio server (separate fro...
Your 180 RINGING message is not being sent from the CUBE.I found this helpful to explain it: https://community.cisco.com/t5/ip-telephony-and-phones/difference-between-180-ringing-and-183-session-progress/td-p/2413632 In a similar discussion, they men...
I have followed the documentation for setting Extended Media Forking up on CUCM and CUBE. I have been unable to get a forking call setup. I show the registration for all five CUCM servers in the XMF config. The LCP port is configured for the new XMF ...
I'm setting up a similar configuration, except we are not using CUBE HA. I have configured it according to the Cisco documentation on CUCM and on the CUBE. I show the registration in the CUBE for each CUCM, but when I test a call, I get nothing from ...
