About marcusbrutus

marcusbrutus · 01-21-2015

Hi Experts, I am summarizing eigrp on a lan interface (gi0/0) attached to a router. Summary is 10.0.0.0/8. Gi0/0 IP is 10.1.1.1. Problem is that when the router uplink goes down and it looses all of the other 10.x routes, it is still advertising th...

marcusbrutus · 09-08-2014

Hi Experts,I have the below EEM configured. No. Class Type Event Type Trap Time Registered Name1 applet user track Off Mon Sep 8 20:33:19 2014 test track 1 state down maxrun 10.000 action 1.0 snmp-tr...

marcusbrutus · 08-04-2014

Hi Experts,Just wish to ask if I performed a tftp transfer from a CE in say Chicago (44 Meg WAN link) to a CE in say Malaysia (10Meg WAN link), is it correct to assume that BW traffic should show a significant increase in utilization given that traf...

marcusbrutus · 06-29-2014

Hi Experts,Just wish to ask if there is an option to retain the as-path information in eigrp when i redistribute from bgp to eigrp then to bgp?I recall coming across something similar to this before but I can't seem to remember it. Thanks in advance....

marcusbrutus · 06-05-2014

Hi Experts, Just wish to ask how do I find the actual port where a specific mac originated in a nexus environment with vpc and fex enabled?When I try to search for the port using:show mac address-table address xxxxxxI can't see the port it is origina...

marcusbrutus · 01-30-2015

Sorry for the late reply Jon; been a hectic-crazy couple of weeks.I appreciate your time and attention to this.

marcusbrutus · 01-21-2015

Hi Jon, I have a lot of 10.x routes coming from the WAN into my edge CE router. I wish to limit the number of prefixes advertised into the LAN switches by summarizing. I have another standby CE also doing the same thing. I wish the primary CE to s...

marcusbrutus · 01-09-2014

Ah ok. I think I get it. I assumed it is dropped by default. So essentially to avoid the Private AS appearing on the path, best practice to apply the remove-private-as command or if dropping is preferred then a manual filter is required.Thanks Jon...

marcusbrutus · 01-09-2014

Hi Jon,I appreciate the response.Please see below link.http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093f27.shtmlFrom my understanding of the above doc, the very reason the command "remove-private-as" was created was to overco...

marcusbrutus · 10-17-2013

Hi Jouni,Thanks so much!!!I will simulate the same when I get the chance.But this sounds promising! Hope this resolves the PBR limitation.

Member Since	‎01-17-2007 10:56 PM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	183
Total Helpful Votes Received	6

User Statistics

User Activity

eigrp summary routes query

EEM Event Track Question

Throughput testing via TFTP across global regions

Bgp-Eigrp-Bgp redistribution question

How to find port where mac originates in a nexus pvc/fex deployment

Sorry for the late reply Jon;

Hi Jon, I have a lot of 10.x

leak private as to public as bgp

leak private as to public as bgp

DST-NAT Query