Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Customer has a 3750 stack (4 switches) running 12.2(55)SE3. They have a username and password for this switch that worked up until yesterday. When attaempting to console in, a login is no longer required. The enable password does not work. I disc...
In the past couple months, I have had 15 of 149 CIVS-IPC-IPC-3530 cameras fail. I've also had numerous cameras (some of which required replacing) become unreachable, requiring me to replace the camera configuration through the VSOM interface. I am r...
I have a Catalyst 6513 at the core. We cut-over four IDF's last evening. The typical IDF follows the following model: A 2960X-48FPD-L at the top of stack with one to four 2960X-48FPS-L in each stack. We are using interface GigabitEthernet 1/0/49 &...
I have two doors that give me DHO (Door Held Open) alarms with non-functional PIR's. Isn't the PIR the device that differentiates the DHO from the DFO (Door Forced Open) alarm? Shouldn't I be getting a DFO alarm when this door opens from either sid...
Zach,Thanks for the information...very useful. It looks like I will be able to implement the WCCP on my 6509 MSFC2 without having to migrate to IOS. I am currently in Hybrid mode running v6.3(3) on the L2 and 12.1.11b-e4 on L3. Can you tell me a c...
