Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Running a lab environment at home with VMWare ESXi 6.5. I have a pair of Nexus 9000v (9.2.4) that is up and running with basic configs from the startup. I am able to SSH to each 9000v fine via mgmt 0. I've created 5 x vSwitch for each port to basical...
I've got a strange issue with using https decryption as I've got a couple of items that are needed for pass-through. There is a custom category that I've created for these internet sites and it is set for Pass Through in the Decryption (Global Polic...
I recently added an SDFlash memory to an IE2000 switch. In event of a switch failure, I can just the SD memory card into the new one. Both IOS and configuration is working correctly and tested. I noticed that the crypto key that was created for usi...
Using a Cisco 2901 ISR configured for H323 connecting to CUCM 7.x - Using H323 for caller-id support on the FXO ports. It's a VIC2-2FXO and both inbound/outbounds calls is working fine. However, when an inbound call is made and not answered, the FX...
We have a site to site VPN between an 800 series router and a VPN concentrator. I want to implement the Zone-based firewall on on the router. On the 800 series router, once I apply the Zone on the outside interface which is the "Dialer 1" VPN conne...
Thanks for the link. With some trial and error, I nailed it down to the security settings on the vSwitch. I created vSwitch to do a one to one connection to port e1/1 on VM1 to e1/1 on VM2. The link you referenced states "The vSwitch mapping to dat...
Thanks for the reply! It does work when I modify the self outzone with IP any any. However, I want to be more specific if possible. I am using NAT on each endpoint as well. Unfortunately I am not onsite, I have the configuration unsaved and I am ...
Hmm.. It turned out to be the pattern itself, which is weird. It had to be changed from 9.1[2-9]XX[2-9]XXXXXX to 91.[2-9]XX[2-9]XXXXXX Discard Predot. Why would it differ since we are using the 9.1[2-9]XX[2-9]XXXXXX on our main site?
