Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've got a strange issue with using https decryption as I've got a couple of items that are needed for pass-through. There is a custom category that I've created for these internet sites and it is set for Pass Through in the Decryption (Global Polic...
I recently added an SDFlash memory to an IE2000 switch. In event of a switch failure, I can just the SD memory card into the new one. Both IOS and configuration is working correctly and tested. I noticed that the crypto key that was created for usi...
Using a Cisco 2901 ISR configured for H323 connecting to CUCM 7.x - Using H323 for caller-id support on the FXO ports. It's a VIC2-2FXO and both inbound/outbounds calls is working fine. However, when an inbound call is made and not answered, the FX...
We have a site to site VPN between an 800 series router and a VPN concentrator. I want to implement the Zone-based firewall on on the router. On the 800 series router, once I apply the Zone on the outside interface which is the "Dialer 1" VPN conne...
We are in process of deploying IP phones for our remote sites. Each has there own gateway PRI/FXO. The issue we are experiencing is outbound long distance calls. We receive a message that calls cannot be completed as dialed. We have created severa...
Thanks for the reply! It does work when I modify the self outzone with IP any any. However, I want to be more specific if possible. I am using NAT on each endpoint as well. Unfortunately I am not onsite, I have the configuration unsaved and I am ...
Hmm.. It turned out to be the pattern itself, which is weird. It had to be changed from 9.1[2-9]XX[2-9]XXXXXX to 91.[2-9]XX[2-9]XXXXXX Discard Predot. Why would it differ since we are using the 9.1[2-9]XX[2-9]XXXXXX on our main site?
Here is most of the config, which does have the ccm-manager fallback-mgcp.application global service alternate default !!!!!!controller T1 0/2/0 framing esf linecode b8zs pri-group timeslots 1-24 service mgcp!!!!!!interface Loopback0 description MoH...
