Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In the video 'All you need to know about ISR Fixed Branch Platforms' there is a mention of 'dynamic core allocation' on the ISR1100 platform.Starting from IOS-XE 17.6 this would appearantly allow the Service Core to be set up as a Dataplane Core, all...
All,Due to CSCsg69672 it now seems possible to change the source address of an outgoing SMTP session. Default behaviour is using the outgoing interface thats used to get to the smtp server.I anyone aware of the command needed to change this behaviour...
Hi,I would like to preauthenticate calls that flow through a CUBE (Cisco Unified Border Element). It however seems to be that the 'aaa preauth' command only can be configured in AS5000s.Accounting works great using AAA-lists. Based on this document: ...
Updated slides from Cisco Live 2023 BRKARC-2881. Shows the command to change the service core into a dataplane core. Verbally it was mentioned that this is only supported on the -X models of 1100.
Did you get any usefull responses from the TAC?
I run into the exact same issue with same NXOS version.. in my case
ip access-list match-local-traffic
worked around it though, thanks @Peter Paluch !
Thanks for your insights. I had some succes with a fully terminating PPPoE server running on 920-12CZ as well.
However: when doing a performance test it was limited to a couple of Mb/s, matching the throughput of the CPU.
That's the reason why I'm ...
Hi, can you elaborate on the PPPoE functionality that is working on the ASR920 in your setup? Is the ASR920 functioning as a terminating PPPoE server? Are you sure that the session throughput is handled in hardware and not in a very limited CPU? Also...
