What is the best approach to covert UDP profiles to hardware devices? short of exporting the UDPs and plug them into the BAT sheet? Do you know of any third party tools that can do this?
Show and Share Thumbnails do not display properly.I created a new DNS entry name (utube.domain.com) in our DNS pointing to the same IP address of the Show and Share server.Using the new DNS name in the URL, web page display broken thumbnails (everyth...
Tried to move user from Unity 4.0.4 to Unity 7.0.2. User move was fine, no errors, except that the PIN did not carry over. Greetings, recorded name, etc were fine.
Quick Question:For the Unity failover server name restriction to have the first 14 characters unique, do I only need to make sure the character at position X is unique?Server Name 1: 123456789Server Name2: 0123456789Will this work? Or do I have to r...
I have a CME ver 4.1 on a 2811. I also have a 7920 wireless with 2 FXO PSTN connections.With 7920 phone load cmterm_7920.4.0-02-00.bin, the hook flash appears but hangs when it receives a call.We upgraded to cmterm_7920.4.0-03-00.bin but the hook fla...
Just Locally for now. We are in the early stages of testing. I resolved it by following what tac said - by changing the hostname of the server and then clicking on verify button again beside the Publish Locally check box. Paul Alvarez, CCIE #25762
I don't know if you want to do that for the entire system.But try this: To do it on just that phone, create a new Voicemail Profile and in the profile, enter the extension of the second phone. Then assign that VM profile to the extension of the secon...
You can just modify the 7970 device profile in the DEFAULT DEVICE PROFILE menu to have more than 2 lines. Or you can add a new default device profile for 7970 if it doesn't exist there.