After adding 3rd CUCM cluster (11.5.1.16900-16) to Prime Collaboration Assurance the newly added CUCM pub is not showing under Alarm & Report Administration / CDR Source Settings / Manage Call Quality Data Source. I've already deleted and re-added th...
Receiving the following collector error on Active Cube:
%VOICE_HA-3-DATA_COLLECT_ERR: (ACTV-Call Leg Data Collect): HA Module SIPSPI reported DATA COLLECT failure (mainst ID:170801, CID:170801)
Receiving the following SIP-3-BADPAIR on Standby Cub...
What worked for me was to calculate the Meraki BSSID based on the MAC OUI and the SSID number in use. https://documentation.meraki.com/MR/Wi-Fi_Basics_and_Best_Practices/Calculating_Cisco_Meraki_BSSID_MAC_Addresses.
For this issue it was later determined that we hit bug ID CSCve21725 - DTMF Interworking Fails on CUBE Ent When Renegotiates From RF2833-RFC2833 to RF2833-KPML and in our scenario had to remove midcall-signaling passthru media-change
Symptom:
When ...
Looking through my notes I believe this issue was resolved by uploading the root and intermediate certs that signed the Exp C server certificate to CUCM as tomcat-trust and then restarting CUCM cluster.