Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Centralized CCM setup. The remote sites are connected over T1 links. The Music on Hold is of really bad quality at the remote site. Now in order to install MUSIC on HOLD servers locally at the remote sites, is it required to use MCS servers ...
Hi All,Does anybody know if the CCM 3.3 support 3rd Party MGCP Compliant gateways. If yes, are there any documents describing the settings or any other parameters we need to configure.thanks,Aslam.
Hi,In preperation for upgrade to CCM 3.3, installed the Backup utility 3.5.6 on existing 3.2.2c, tried to do a backup and got the error Failed to backup migration-backup folder successfully.Did any one else come across this error and can anyone tell ...
Can anyone please help me with configuration of RMON on a SUP III blade on a 4006. I got some links which show how to do it in CAT OS but need to know if there is any documentation available for IOS.Thanks in adance.Aslam
Can anybody help me understanding these errors on a VPN 3005, configured for LAN-to-LAN. Is it a configuration issue or a Hardware issue.60534 10/28/2002 05:16:04.220 SEV=4 IKEDBG/0 RPT=75 QM FSM error (P2 struct &0x1d07664, mess id 0x4bb56838)!6053...
Dont want to speak for Yogi :), but Yes, you can do that. Just make sure you use differnt profile name (it can be overwritten if you use the same name or the default one) also use different Jtapi users, CTI RP and CTI ports.Hope that helps,Aslam.
Hope this helps,Weights for IP phone - 1, DS0 port,- 3 Transcoding resource - 3, Conference resource -3, TAPI - 20JTAPI - 20 CTI ports and route points fall under JTAPI so count 20 for each one of them.The total device units of all devices configured...
Make sure you use the right product keys, when you insall the software. The components installed depend on the keys you provide during the installtion.Aslam.
