Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi all I have a question, excuse me if that's silly, but I am currently certified as a CCNP Enterprise with wireless specialties, which was previously CCNP Wireless.My question is to recertify, is it necessary for me to only take one exam, either fro...
hi allI have a question regarding the EEM feature, I have a catalyst 4500 switch with the version (cat4500e-universalk9.SPA.03.11.02.E.152-7.E2.bin ").I have looked for documentation regarding the sending of temperature alarms and that these are sent...
Hi all!I have a switch model C9300-48UXM, within my configuration in the SVI 100.I need to set the bandwidth limit to 2 Mb. when creating the class-map and policy-map: class-map match-all VLAN_100|2MBPS
match vlan 100
!
!
policy-map VLAN_100|2MBPS
cl...
HelloSomeone will know what these records mean, I read on the Internet and found three possible causes (load balance, bad signal of response in the final equipment and some type of attack), the strangest thing is that it only happens in WLAN ID 1 and...
hola
tengo un caso abierto con el tac de cisco y aun no me han dado respuesta, en la red WLAN del cliente se tiene una WLC 8540 con AirIOS 8.3.122.0 y tengo asociados access point modelos 1850 en particular, cabe mencionar que no todos pero si algu...
Hi ....Tanks for helping me !!Not entirely, I was wrong to explain it, sorry. When entering the “show environment temperarure” command... and validating the temperature of the box, he observed that there is a temperature alarm threshold for each modu...
the version of wlc is 8.5.135.0, this version i updated it last Monday.
I check the information you send me, I find these syslogs strange because they are shown in SSIDs that do not occupytanks a lot! Rasika
hola Rafagracias por la info la revisare, pues en los logs no encontre algo relacionado al LED:System logging:Jan 16 17:59:03 syslogd started: BusyBox v1.23.2Jan 16 17:59:03 kernel: printkd started: BusyBox v1.23.2 (2017-08-03 13:52:39 PDT)Jan 16 17:...
hay otras 2 controladoras en sitio una 4400 y 5508, pero dentro de la configuración de cada AP tienen marcado cual es su wlc y el parámetro de master wlc esta desactivado en esas dos, estas solo se manejan para AP de modelo ya viejito.crees que vaya...
Hola!Así es .... aunque el AP sigue funcionando de manera normal, pues al cliente le causa ruido este tema del led, y pues hasta donde se pues el led se torna de ese color por el dominio regulatorio o porque esta descargando el software de la wlc.
