Running UCS 3.2.2f with B480M5s with same firmware. I have a Power Control policy to impose "No-Cap" Power Control. Each server where it is applied, i get the F0637 fault. If I remove the policy, the fault clears. I had seen a bug in 3.1 but res...
I am getting the following message on one of multiple B480s with 1340/1380 mezzanine cards. All blades have the same host firmware package. Downgrading/Upgrading did not help. Running version is 4.2(3a). I did not see this in the release notes.
...
I have a question on ACI VLAN usage pertaining to physical domains
I know the vlan is one of the means to associate traffic to an EPG. When a VLAN is used on a switch to associate traffic to an EPG, the vlan cannot be used elsewhere on the switch...
When I look at the 'show configuration' output of the service profile on the CLI, i do not see the information of the inband configuration. Where would I see this from the CLI.
UCSM 3.2.2
Looking for the UCS 3.2 XML Schema. The latest version i can locate is 3.1. Anyone know where the 3.2 can be found?
https://communities.cisco.com/docs/DOC-36350
Thank You,
Dan
ucs-A /chassis/server # show power-budget expand detail
Budget: AdminCommitted (W): 0
ucs-A /chassis # show power-budget detail
Budget: Device Id: blade 1/1 Power Cap (W): 0 Applied Power Cap (W): 25 Admin Priority: No Cap Maximum power (W): 0 ...
"Yes, it is perfectly possible to use the same VLAN ID to represent different EPGs so long as the EPs are attached to different leaf switches, even if the EPGs are associated with the same Physical Domain and same VLAN Pool."
I have had this confir...