About lecabral

lecabral · 05-25-2024

Hi community,In our environment I have many 9k switches onboarded to DNA Center. I'm in the need to perform a config change to all of them, but I'm unclear on how to proceed. I'm used to utilize the Provision feature with templates, but I'm not sure ...

lecabral · 04-29-2024

Hi all,I'm configuring a 9200L switch to be a spare, just with its management interface Gi0/0 configured. It's up and running, and I can login using a local account. However radius is not working, it seems that the switch is unable to contact the rad...

lecabral · 04-26-2024

Hi,I wonder which is the best way to monitor our DNA Center appliance. We have all our networking infrastructure monitored and we want to have DNA Center also under this tool (from SolarWinds). We usually monitor using icmp and SNMP. Is it possible t...

PI API radius user · 03-14-2023

Hi,We have been using Prime 3.9 API with a local PI user (nbi_read) but we would like to use a radius user instead. I'm wondering if anyone knows if this is possible and a sample reply to receive from ISE, most likely ISE will need to return two role...

lecabral · 03-08-2023

Hi,I'm trying to achieve something that should be fairly simple: configuring a standalone IW3702 running version 15.3(3)JPN1 as a workgroup bridge AP.I've followed instructions from links like this one, but I don't have the exact same commands availa...

lecabral · 07-29-2024

Hi! I'm in the same situation and I'd like to confirm if we're still in the state or if we can somehow check the AD-Host-Resolved-DNs value. We're using ISE 3.2 patch 6. Thx!

lecabral · 06-06-2024

Thank you @estetson Your last paragraph applies well to my situation and I have already tested it successfully. Associating the template with a tag did help, I was able to push the config to all switches of the same family with the tag.Thanks again.L...

lecabral · 05-27-2024

I checked the link but it doesn't reveal anything new. I'm familiar with creating a Template, associating it to a product family, and then gluing it to a site using a Profile. However if I try to do that for this case, in the upper portion of the hie...

lecabral · 05-26-2024

To make may question shorter: How do I push a simple change to all my switches under a certain branch of the Hierarchy? (and all of the switches in the sub-branches)?

lecabral · 04-29-2024

It finally worked, with this config:!aaa group server radius ISE_GRPserver name ISE_SRV1server name ISE_SRV2server name ISE_SRV3ip vrf forwarding Mgmt-vrfdeadtime 10!Thank all for your guidance!LeoC

Member Since	‎04-05-2018 11:41 AM
Date Last Visited	‎07-31-2024 07:01 PM
Posts	26
Total Helpful Votes Received	1

User Statistics

User Activity

Best way to modify multiple switches across the DNA Center hierarchy

Access via Management Port with radius authentication

Monitoring of Catalyst/DNA Center itself

PI API radius user

Configure IW3702 as Workgroup Bridge

Re: Using AD-Host-Resolved-DNs in Profiling

Re: Best way to modify multiple switches across the DNA Center hierarc

Re: Best way to modify multiple switches across the DNA Center hierarc

Re: Best way to modify multiple switches across the DNA Center hierarc

Re: Access via Management Port with radius authentication