Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
Currently I have an issue where when I put the "service survivability" command under the incoming dial-peer, it seems to be overriding the translation profile on that dial-peer. This has become an issue because we are relying on the transla...
Hi All,
I have a client that currently wants to stay on the basic paging license. I was wondering if anybody knows if there are any software limitations to how many "Recepient Groups" and "Phones" we can create with Informacast Basic Paging. I am ...
I am trying to select WPA/WPA2 as the security mode for the 8821 WLan settings. However, when I go to the phone the choices I get are only WEP, PSK, EAP-FAST, EAP-TLS, PEAP-GTC, and PEAP-MSCHAPv2. I updated to the latest firmware and I also looked th...
Hi all,
Currently have a Call Manager: 11.0.1.22900-14 with 8851 phones running the latest firmware 12-1-1SR1-4. We currently have Prime Line on globally and it is working as intended. However, when we highlight the second or third line and off ho...
Hi All,
I currently have a 3945 with 15.5 ios version. This gateway currently has 5 PRIs connected to it. However, when we try to use the "debug isdn q931" command, it only seems to be displaying a the partial output of the command(please see belo...
I have the same inquiry on how to verify the following:
"If Cisco Emergency Responder is using a secure JTAPI connection, the CTLfile.tlv, JtapiClientKeyStore, and JtapiServerKeyStore files may get deleted post the upgrade"
Upgrading from 11.0 ...
hmm debug ccsip all is also incomplete. I tried to do the logging 10000 and and it is still the same result. Ive ruled out the terminal because I've used secure CRT, putty and its still displaying the same result.
Hi Leo,
Thank you for your response. I dont have much experience with these wireless phones so when you mean key management style..is that a setting on the phone you are referring to? Currently I do not get WPA and WPA2 as a choice on the phone for...
Was able to find a solution to this. On the phone screen in Call Manager under Product Specific Configuration Layout > Line Mode> Switch to "Enhance Line Mode". This will ensure that second/tertiary lines and so forth will switch back to the primary ...