Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I want to reset my local enable secret as it keeps denying me priv-exec mode when I console into the switch. I know that when you need to log into a switch via console you either create a separate authentication profile or modify existing one as per...
My provider is delivering internet over a 10Gb SM fiber to my Cisco ISR 4331 which has a 1Gb SFP. The ISP policed the ckt at 1Gb. Can I accept it on my 1Gb SFP?
We have a pair of Cisco 9500's utilizing stackwise. We recently lost connectivity to one of the pair and when consoling into it I see it just says Switch# . I'm new to Stackwise, to reconfig do I just need to power cycle it and the active superviso...
QUick question, I have a pair of cores and in each core I have an SVI for a vlan created in an active standby fashion. I turned up the SVI interface that is going to be my primary SVI interface (setting a preferred priority to it's HSRP config). I ...
We use an active/active configuration for our MSTP where instance 1 odd vlans is set with a lower priority on one core switch (making it the root bridge for odd vlans) and instance 2 for our even vlans is configured with a lower priority on the other...
So if my config is as shown below, when logging in via console and successfully getting to the ROUTER> prompt, I need to enter the local enable secret password as defined below. If what I think is the local enable secret isn't working, can I just go...
What if the provider replaced their SFP+ with a SFP? We ordered a 1Gb ckt with the ability to upgrade to 2Gb, so it was delivered via a 10Gb ckt on which they police us to the bandwidth we pay for. But if they could replace their SFP to match our o...
So the other switches will get the new vlan anyway as they are VTP clients. But I still need to update instance 2 in these switches with the new vlan, even if no hosts on those switches will use that vlan?
What a tangled mess Boost has turned out to be. So Cisco has a bug with their Boost eval license activation. Here's the link to the bug,
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvn07416/?reffering_site=dumpcr
So after several hours of wo...
