Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've been tasked with implementing a godaddy wildcard ssl certificate on a new ASA based VPN cluster. This is replacing our legacy individual certs and is a great way to go. The issue is I've tried just about everything I can and read so many appro...
1524 LAP with 2.4, 4.9 and 5.8 radios. The WLC configuration is setup to allow client access via the backhaul interface. There's a need to be able to access from 4.9 and 5.8 clients. 4.9 clients work fine as do the 2.4 clients. The 5.8 is used fo...
We have many new and very small remote sites that will be connecting via an ASA5505 using easy VPN. Works without an issue and we've got the configuration and process nailed down.The challenge I was presented with today involve non-standard remote s...
We have a legacy wireless deployment using Cisco 3250 Mobile Routers and of course the associated agent routers, etc.We're replacing the core with a controller based solution and with the wireless being driven from 1520 APs. The 3200 MAR will remain...
If a site with SRST looses power for a time beyond the UPS (8+ hours) will the IP Phones begin operation even if they can not reach the CCM / DHCP servers via the WAN. I.E. is the last configuration stored in the phone?Thanks in advance.
I have this one and it is correct for a specific certificated not a Wildcard certificate which has a FQDN like *.wildcardcert.com. The goal is to get to a wildcard certificate to eliminate the management / certificate valiation processes we've been ...
Thank you for the link and insight. The configuration I had followed what was presented in the link. You do not need to create split tunnel defintion in the profile.What I discovered was that UDP will fail when translated to the primary outside inte...
Going up from the CW configuration baseline is generally not an issue. As I'm sure you're aware changing parameters of this type can impact the overall performance/operation of the system. I would suggest only changing the baseline configuration i...
I would suggest activating netflow on the desired interfaces. This will provide granularity that is not available from the interface counters. Keep in Netflow will present load to the device. You can then pull the Neflow statistics via several met...
Web based interface accessed usinghttp://nGeniusServer:8080 (nGeniusServer = your server name)You'll also need RMON probes (Netscout or NAM cards, etc).
