We plan to migrate our network to SD Access, but we found the DNA-C assign the first available IP address on a given IP address pool to the anycast gateway (for example, 192.168.10.1 for network 192.168.10.0/24). However, on our network, we use the l...
I have a very weird issue with multicast on nexus 7000, i am running NXOS version 6.2(16)
The setup is the following:
Two Nexus 7710 running in vPC, all SVI are local on these Nexus
There are two access switches, SWITCH01 and SWTICH02
Multicast Sourc...
I need to change de IOS XE version on a pair of 3850-12XS, they are in INSTALL mode:
Switch#show ver | i INSTALL * 1 16 WS-C3850-12XS 16.3.1 CAT3K_CAA-UNIVERSALK9 INSTALL
I am follo...
Is there any break/escape key sequence from a telnet/ssh session from a Cisco Nexus to another device?I know on IOS and IOS XE we can use ""Ctrl+Shift+6" to break a telnet/ssh session and get back to the device, but I can't find a method to to the sa...
Is there any way to verify the status on the DC power supply on an ASR 9000v from the parent ASR 9010? (power usage and inputs status).So far, the only way I can tell there is a failure on any input is by the CRIT LED on the 9000v itself.
I guess I didn't make my question clear enough.There are cases when you get stuck on a telnet/ssh sessions (for example, when changing the IP address on the direct link on the remote device), and you have to go back to the local device to manually ki...
FAN 1 and 2 is usually a Sunon KDE1204PKVX or a NMB 1608KL-04W, these are the stats:Size: 40x40x20 mmRated Voltage: 12VInput Current: 0.12AInput Power: 1.4WSpeed: 8200 RPMMax Air Flow: 10.8 CFMMax Air Pressure: 6.9 mmH2OFAN 3 is either a DELTA FFB041...
