Is there any way possible to have a group of devices to be assigned a resource to let a group of people "only" manage specific devices?It would be nice for them to manage only their local equipment and not have the ability to see all phones and gatew...

I am wondering what tool or tools you are using to update User in UCM 6.1. We have over 5,000 ip phones and would like to give certian user the ability to make changes like names on extensions with out compromising them changing anything else.Somethi...

Here is my config.interface GigabitEthernet1/0/1 description RECORDING_SERVER switchport access vlan 110 switchport mode access spanning-tree portfastmonitor session 1 source vlan 110 - 121monitor session 1 destination interface Gi1/0/1 ingress untag...

I have installed a USB Sound Card in our Publisher. I am using the MIC as the input for the audio from our Fixed source. The question I have is can I use the MIC port? I read in another discussion where someone used the Plantronics 45 device which ha...

I am connecting a 6508 pri to a channel bank. I can get the line to come up, but the Callmanager is not showing registered.Cisco MGCP T1(CAS) to an Adtran 750 (provides POTS)I can place a loopback into it and everthing looks good. It sees the active ...