Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are getting frequently Blank calls from ‘’root” for the below Systems, and this systems are connected directly on ILL Line.
1. Cisco Room Kit -- FOC2433K854 – Adama Gujrat Plat
2. Cisco Room Kit -- FOC2433K84Y – R&D Director VC ...
Hi, I have a requirement for implementing Private VLAN. and suddenly i got a concern : can a normal access port which is assign with primary vlan, communicate with private vlan (community,isolated,promiscous)
One solution is while configuring wlc through through putty or any other terminal emulator, chnage flow control from XON/XOFF to NONE.
It will work.
By Manish kumar
Nipun.net
hi,
I am also facing the same issue. If the flex connection loosing the vlan's then how it integrates with WLC. i have 5 Aps in my network. i have seen the same issue at the time of the AP integrated with the WLC. Out of 5 APs are integrated with WLC...
Hi Saravanan,
i found one errorcode which you mention is 34,could please let meknow the reason for this.
34
Association denied due to excessive frame loss rates and/or poor conditions on currentoperating channel
NOT SUPPORTED
