flexconnect losing mapping

[Koevi Vong]

Hi,

I have several APs where if they lose power and re-associate to the same WLC they would lose their VLAN mappings under the Flex connect tab.

I get the below error log from the AP:

*Mar 15 03:42:06.187: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file

*Mar 15 03:42:06.188: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file

*Mar 15 03:42:06.188: %LWAPP-4-CLIENTEVENTLOG: No LS Flex ACL map configuration file to load. Connect to controller to get configuration file

*Mar 15 03:42:06.189: %LWAPP-4-CLIENTEVENTLOG: No Central Dhcp map configuration file to load. Connect to controller to get configuration file

Any idea why the AP is losing its VLAN mapping?

Thanks

[Saurav Lodh]

Please upgrade the WLC

[nipunsupport]

hi,

I am also facing the same issue. If the flex connection loosing the vlan's then how it integrates with WLC. i have 5 Aps in my network. i have seen the same issue at the time of the AP integrated with the WLC. Out of 5 APs are integrated with WLC and remaining 2 APs are rebooting. 

if we loos the flex vlan  mapping the how those 3 APs are integrated.

Thanks and Regards,

Nipun net solutions.