Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,we have a network composed by different Cisco switches models (9300, 3750 etc) and authentication with 802.1x is working on all switches except on the 3850 switches. We tried to authenticate a PC on a 9300 and it is working, but when we connect...
Hello, we are having a problem with call forwarding that consists in the impossibility to forward calls to a mobile phone. On webex the user can correctly call the mobile phone, but if he puts the number on his forwarding setting the call cannot be p...
Hello, I have an EWC composed by 9120 APs, for only one SSID is it possible to set a limit to the bandwidth that can be used? If yes, is for all users together or is referring to each user that connects to the SSID?Thank You and kind regards
Hello, let's suppose that I have a switch that needs a TACACS+ (for authentication on network devices) and a RADIUS configuration (for 802.1x), can I configure the switch to point to a singular server for TACACS+ and to point to two servers for RADIU...
Hello, on Cisco ISE is it possible to redirect a client on a "remediation" VLAN (such as a guest VLAN with only Internet access) if the client that connects to che network (for example a specific port) don't meet certain requirements? If yes, how we ...
Hello, no specific IP, I cannot test from the switch because I don't have test credentials to use, the version of OS is 16.12.09 and I found the manual Security Configuration Guide, Cisco IOS XE Gibraltar 16.12.x (Catalyst 9300 Switches) - Configurin...
Solved! We had an RSPAN session that was messing with the VLAN ID of BPDUs, removing the RSPAN session (source: VLAN 2, destination: VLAN 4) from all the switches fixed the problem