08-02-2004 08:47 PM
Dear all,
I need to configure logging CDR from the Cisco 5300 to external Syslog server.
1. Please kindly advise how should i proceed. Or may be some reference of the setting ?
2. I plan to use KIWI Syslog software (available on the net) for this purpose. Anybody tried that before?
If yes, how is the outcome?
Thanks for your help in advance.
Regards,
Anthony
08-17-2004 04:56 PM
Hi
This link is going to be useful for you. It's just a simple configuration.
By the way, kiwi is a good tool. Just be aware of the file lenght where you store your logs, and try to make copies to avoid any loss of your records.
Regards.
http://www.cisco.com/en/US/partner/tech/tk652/tk701/technologies_tech_note09186a0080094e72.shtml
08-27-2004 06:06 AM
Just in case , if you do not have access to the link , here I attached the PDF format file.
http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080094e72.shtml
09-10-2004 09:49 PM
OK, Thanks alot , guys.
Will try it out.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide