cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1093
Views
0
Helpful
4
Replies
Highlighted
Beginner

AS5400 as MGCP residential/trunk gateway

Can the AS5400HPX be used as an MGCP gateway to hand off FXS and E&M endpoints on DS0s over the  CT3 controller?

I have configured it as specified in:

http://www.cisco.com/en/US/docs/ios/12_1t/12_1t3/feature/guide/MGCP1213.html#wp1040696

When the endpoints are configured as FXS or E&M, I get the following errors:

    Oct 19 19:51:44.846: MGCP Packet received from 1.2.3.4:2727--->

    RQNT 16233737 S1/ds1-2/1@[10.0.0.1] MGCP 1.0

    N: 1.2.3.4

    X: 1

    R: L/HD(N)

    S:

     Q: STEP

    T: L/HU,L/HD,L/HF,D/[0-9A-D#*T]

    <--- 

    Oct 19 19:51:44.846: mgcp_verify_supp_reqdet_ev: event not supported

     Oct 19 19:51:44.846: Following traceback is for INFO ONLY. -Traceback=  0x618C49EC 0x618EAE54 0x618AB758 0x618D00CC 0x618C6850 0x61886704  0x61887B30 0x6188A464 0x604E952C 0x604E9510

     Oct 19 19:51:44.850: MGCP Packet sent to 1.2.3.4:2727--->

    512 16233737 unsupported R: event

    Oct 19 19:56:48.769: MGCP Packet received from 1.2.3.4:2727--->

    RQNT 16301148 S1/ds1-2/1@[10.0.0.1] MGCP 1.0

     N: 1.2.3.4

    X: 1

    R: DT/SUP(N),DT/RLC(N)

    S: DT/REL

    Q: STEP

    T: DT/SUP,DT/ANS,DT/RLC,DT/REL,

DT/RES,DT/SUS,D/[0-9A-D#*T]
    <---
    Oct 19 19:56:48.769: mgcp_verify_supp_reqdet_ev: event pkg not supported
     Oct 19 19:56:48.769: Following traceback is for INFO ONLY.  -Traceback= 0x618C49EC 0x618EAE54 0x618AB758 0x618D00CC 0x618C6850  0x61886704 0x61887B30 0x6188A464 0x604E952C 0x604E9510
    Oct 19 19:56:48.773: MGCP Packet sent to 1.2.3.4:2727--->
     518 16301148 unsupported R: event pkg
    <---
4 REPLIES 4
Highlighted
Rising star

AS5400 as MGCP residential/trunk gateway

Your debug shows "unsupported R: event pkg".


RQNT !--- This is the notification request (RQNT) message sent to the call !--- agent to report the observed event.


R: L/hu(N) 

!--- The call agent requests (R) to be notified (N) immediately 
!--- that an on-hook (hu) condition exists. 
What is your IOS? What is the installed mgcp packages?

Regards.
Highlighted
Beginner

AS5400 as MGCP residential/trunk gateway

If I'm reading it right, that should mean to use the line package and notify on off hook transitions. I would think having the line package in the capabilities would allow this to work, but its not.

It currently has c5400-js-mz.124-19.bin

The mgcp config is:

mgcp

mgcp call-agent 1.2.3.4 2727 service-type mgcp version 1.0

mgcp restart-delay 10

mgcp package-capability dtmf-package

mgcp package-capability mf-package

mgcp package-capability line-package

mgcp package-capability rtp-package

mgcp package-capability nas-package

mgcp package-capability as-package

mgcp package-capability script-package

mgcp package-capability it-package

mgcp package-capability fm-package

mgcp default-package dt-package

no mgcp timer receive-rtcp

mgcp bind control source-interface FastEthernet0/0

mgcp bind media source-interface FastEthernet0/0

sh mgcp:

MGCP default package: dt-package

MGCP supported packages: gm-package dtmf-package mf-package trunk-package

                         line-package rtp-package nas-package as-package script-package

                         ms-package dt-package mo-package res-package it-package

                         mt-package fxr-package fm-package

Highlighted
Rising star

AS5400 as MGCP residential/trunk gateway

Strange.

AS shows:

...

R: L/HD(N)

...

512 16233737 unsupported R: event

mgcp error:

512

Unable to execute transaction because of gateway being unable to detect one of the requested events.

R: L/HD(N) is the requested event where L is the Line package, HD is Off-hook transition and (N) means Notify immediately.

In the second case AS shows:

...

R: DT/SUP(N),DT/RLC(N)

...

518 16301148 unsupported R: event pkg

mgcp error:

518

Unsupported event package.

R: DT/SUP(N),DT/RLC(N) is the requested event where DT is the DTMF and Dial Pulse package

mgcp package-capability line-package and dt-package are loaded correctly

Can you try a different IOS? A recent T IP PLUS release like c5400-is-mz.124-15.Txx.bin?

Regards.

Highlighted
Beginner

AS5400 as MGCP residential/trunk gateway

Upgraded to 12.4(15)T16 ENTERPRISE PLUS and the problem persists.

CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey