How to route call from PSTN on voice gateway AS5400 with specific CIC

[daneth.mean]

Dear All,

HI expert, Is there anyway to route call from Mobile PSTN on specific CIC ( Example= cic:16 ) to AS5400 out to the world.

Here is My scenario:

Mobile Number --------> PSTN switch --------> PGW ( SS7 ) --------> AS 5400  ---------H323---------> call to  USA ( Terminating Gateway )

                                                                            CIC=16 

Regards,

Danet

[Daniele Giordano]

Edit your incoming DialPlan and add a new rule for incoming mobile numbers.
This rule will use a new ResulSet.
In the ResulSet you must select a specific Route List.
The Route List will use a Route with a special trunk where you will define only one CIC.

Regards.

P.S. The creation procedure is in the opposite order (trunk -> trunk group -> Route -> Route List -> Resul Set -> Dial Plan).

[daneth.mean]

Dear Daniele,

I might lost CD somewhere already when first product delivery.

Now are you using only with CLI mode.

Can you provide provision with CLI summary example ?

Best Regards,

Danet