cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1973
Views
0
Helpful
1
Replies
Highlighted
Beginner

It supports the VIC2-4FXO card on a 3925 router?

I have a 3925 router to which you just install a 4 port FXO card (VIC2-4FXO) the problem is that the router does not recognize me this card, if it appears in the inventory show, but if I do a show run does not show me the voice-port? /? /?. and obviously I can not configure ...

My question is, I have to make a special configuration or just the card is not compatible?

Thank

RouterTelefonia#sh inventory

NAME: "CISCO3925-CHASSIS", DESCR: "CISCO3925-CHASSIS"

PID: CISCO3925-CHASSIS , VID: V02, SN: FTX1642A04S

NAME: "Cisco Services Performance Engine 200 for Cisco 3900 ISR on Slot 0", DESCR: "Cisco Services Performance Engine 200 for Cisco 3900 ISR"

PID: C3900-SPE200/K9   , VID: V04 , SN: FOC16400V7B

NAME: "2nd generation four port FXO voice interface daughtercard on Slot 0 SubSlot 0", DESCR: "2nd generation four port FXO voice interface daughtercard"

PID: VIC2-4FXO=        , VID: V  , SN: FOC09340MUF

NAME: "SM-ES3G-16-P: EtherSwitch SM L3 + PoE + 16 10/100/1000 on Slot 2", DESCR: "SM-ES3G-16-P: EtherSwitch SM L3 + PoE + 16 10/100/1000"

PID: SM-ES3G-16-P      , VID: V02 , SN: FOC16384D6V

NAME: "C3900 AC-POE Power Supply 2", DESCR: "C3900 AC-POE Power Supply 2"

PID: PWR-3900-POE      , VID: V03, SN: SNI1521C71X

1 ACCEPTED SOLUTION

Accepted Solutions
Rising star

It supports the VIC2-4FXO card on a 3925 router?

Hi, the 3900 Series Integrated Services Routers support Network Modules like the VIC2-4FXO via an adapter (part number SM-NM-ADPTR).

You can find more info here

http://www.cisco.com/en/US/prod/collateral/modules/ps5365/product_data_sheet0900aecd801c595e.html

and here

http://www.cisco.com/en/US/prod/collateral/modules/ps3115/product_data_sheet0900aecd8016c1c6_ps5855_Products_Data_Sheet.html

Regards.


1 REPLY 1
Rising star

It supports the VIC2-4FXO card on a 3925 router?

Hi, the 3900 Series Integrated Services Routers support Network Modules like the VIC2-4FXO via an adapter (part number SM-NM-ADPTR).

You can find more info here

http://www.cisco.com/en/US/prod/collateral/modules/ps5365/product_data_sheet0900aecd801c595e.html

and here

http://www.cisco.com/en/US/prod/collateral/modules/ps3115/product_data_sheet0900aecd8016c1c6_ps5855_Products_Data_Sheet.html

Regards.


CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards