VIC3-2FXS/DID which is update version of VIC2-2FXS is not function well although configuration is same as vic2-2fxs, I can able to dial and there is ring but after picking by receiver within seconds line get disconnected I can hardly hear hello**!! from otherside then it cuts. this is happening on both ports.
other details on this issue:
orignal card vic2-2fxs of 2801 was damage so i have to get new but same model is now out of sale & replacement is vic3-2fxs/did.
new card vic3-2fxs/did was not detected so I have to update IOS ipvoicek9mz.124-20T on 2801
copied same configuration (vic2-2fxs which was running smooth but using other version IOS)
dial-peer voice 112 pots destination-pattern 112 port 0/0/0 ! dial-peer voice 113 pots destination-pattern 113 port 0/0/1 !
I notice when i tested sound card localy (hooking telephone sets on both ports) and if i dail number there is ring and sound is good no disconnects no issues atall but when router sends to branch and connects to telephone sets and dail the number from other branch it rings and disconnects after receving hello.
voip configuration (same config is working fine with vic2-2fxs)
class-map match-any REAL-ESTATE-VoIP match access-group name MATCHING-VOICE-PACKETS class-map match-any REAL-ESTATE-CALL-SIGNALING match access-group 100 match access-group name VoIP-RTCP class-map match-any KHARJ match access-group name KHARJ ! ! policy-map REAL-ESTATE-VoIP-POLICY class REAL-ESTATE-VoIP priority 67 class REAL-ESTATE-CALL-SIGNALING bandwidth 8 class KHARJ shape average 150000 bandwidth 150 class class-default fair-queue random-detect !
ip access-list extended KHARJ remark This Access list will match the ip traffic sourced from any to any permit ip any any ip access-list extended MATCHING-VOICE-PACKETS permit udp any any range 16384 32767 ip access-list extended VoIP-Control permit tcp any any eq 1720 permit tcp any any range 11000 11999 permit udp any any eq 2427 permit tcp any any eq 2428 permit tcp any any range 2000 2002 permit udp any any eq 1719 permit udp any any eq 5060 ip access-list extended VoIP-RTCP permit udp any any range 16384 32767 !
access-list 100 permit tcp any eq 1720 any access-list 100 permit tcp any any eq 1720 access-list 100 permit udp any eq 1719 any access-list 100 permit udp any any eq 1719
Check out our latest release on Cisco Routed Optical Networking solution. Listen: https://smarturl.it/CCRS8E24Follow us: https://twitter.com/ciscochampion Disruptive network transformation may only happen once a decade. First movers c...
BGP flowspec in a nutshell is a feature that will allow you to receive IPv4/IPv6 traffic flow specification (source X, destination Y, protocol UDP, source port A .. etc) and actions that need to be taken on that traffic (drop, or polic...
In EVPN A/A + IRB both PE in same EVI have BVI playing a default GW role. Its not supported to have BVI to be shutdown on one of PEs, In this case if if traffic hit this PE with DMAc equal to BVI Custom MAC, then it will drop this traffic du...
Crosswork Cloud - Crosswork Traffic Analysis - FAQ
Crosswork Cloud - Crosswork Traffic Analysis is a Cloud-hosted Software as a Service platform that provides Netflow based Traffic Analytics. The Crosswork Traffic Analysis platform Traffic Analysis, Peeri...
Cisco Champion Radio · S8|E9 Innovations to Achieve a Trustworthy Infrastructure
How do you know for certain that a router in your network has not been altered with since you deployed it? Wouldn’t it be great if you can cryptographically challenge your r...