We've an SPA112 connected to a BT-brand cordless phone. It doesn't detect that the phone is off the hook and there is no dial tone. I upgraded the firmware to '1.4.1 (002)' (the latest version), then configured it and used a basic corded phone to tes...
Hi, I am hoping I can get some help here. I have spa3102 which started creating click sound and would drop ethernet connection and as a result started dropping calls. I noticed that on picking up phone it would create a click sound and ethernet goes...
Hello, friends. I have a problem. No form of login and password. I tried to connect other phones of the same model (Cisco SPA-504G). Similarly. What am I doing wrong? Help pls.
Hi all, I have Cisco SPA112 and I need to set up connection between SPA112 and Analog PBX in Line 1 and redirect incomming calls there to Line 2 where is connected phone. When I call on pbx line (150) which lead to Line 1 on SPA112, I can see LED bli...
I have 2 VOIP-accounts of which I use one for incoming calls and one for outgoing calls. I used to have a Zyxel modem (P-2812HNU-F1) in which I could easliy configure the two SIP-accounts to use the same RJ11-port. In that way I only needed to connec...
Hello, I have a SPA514G phone and I upgraded the firmware to 7.5.5. For the most part the phone is ok nut at times it can be a little buggy, for this reason i want to change it. Ideally I would like to go back to 7.5.2 as this was the previous vers...
I've purchased three of these products and all three of them have had the same issue on completely different physical LANs (different switches, Ethernet cables, etc.) so it has to be something with the devices. I sent the first two back thinking it ...
My setup / use case is the following: * SPA232D * Calls are placed via analog phone connected to the phone port * 2 SIP user ids and passwords at my SIP provider (didlogic) with different phone numbers * All directly dialled numbers (no #9 prefix) sh...
Can a Cisco SPA525G phone be used as a landline phone?
i am using BE6k solution so for this can we add multiple extensions on single cisco phone? and single extensions on two ip phone?
Hi All, Im currently experiencing an issue with a cisco ata 112. Its currently registered with the sip provider and works perfectly to make calls when connected to a telephone. the moment we have a fax connected to the line, it stops working. the fax...
I am used to a UC320, and migrating to a UC520 - This maybe a simple question to some of you, but this is foxing me, and I am not a command line expert by any means so please go easy on me! I have a mixture of SPA525G, SPA303, SPA504G & SPA501G phon...
Hi, I just purchased a used UC520W for home office. I reset to factory defaults by copying the factory config (UC520W-16U-4FXO-K9-factory.cfg) to the startup. I plug a PC into 0/1/0 (1st of the 8 POE Ports), and the machine is not reciving a IP from ...
Hi There Everyone, I am getting this output from a customers ATA - SPA112. Can anyone tell me what it means ? <3>Jan 1 00:00:05 aklpuk1SPA112 [17179569.416000] physmap-flash physmap-flash.0: map_probe failed<3>Jan 1 00:00:05 aklpuk1SPA112 [17179571...
Can someone upload an image file for a UC520? I need to get one loaded on my device and Cisco won't give me access to download it. Thanks, Ken
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: