06-12-2012 10:47 AM - edited 03-21-2019 05:54 AM
Hello,
How do you get the 9 to be addeded automtically when dailing out using Call Connector Toolbar?
Thanks,
Solved! Go to Solution.
06-14-2012 11:58 AM
Yes it is handled from that dialog... if you goto the "Advanced" tab under the "Phone and Modem" window you should see "Cisco Unified CME Telephony Service Provider". The "Dialing Rules" tab is where outside-line prefixes are specified.
I have set this up on dozens of PC's -- that is definetely where it needs to be configured.
The one other thing to check -- if you are dialing from outlook, make sure outlook is set to use the Cisco adapter. (This is configured in the "Dialing Options..." menu accessed from the Outlook "New Call" window)
06-12-2012 01:20 PM
Under modem settings in the control panel you can specify a digit for an outside line.
06-14-2012 10:03 AM
The modem setting are setup, but I do not think the call connector is treated as modem. It belive the connects to the UC via IP using SSCP. I am not sure how the call connector connects but i would assume it would be the same.
06-14-2012 11:58 AM
Yes it is handled from that dialog... if you goto the "Advanced" tab under the "Phone and Modem" window you should see "Cisco Unified CME Telephony Service Provider". The "Dialing Rules" tab is where outside-line prefixes are specified.
I have set this up on dozens of PC's -- that is definetely where it needs to be configured.
The one other thing to check -- if you are dialing from outlook, make sure outlook is set to use the Cisco adapter. (This is configured in the "Dialing Options..." menu accessed from the Outlook "New Call" window)
06-18-2012 04:57 PM
Worked like a charm thanks!
06-25-2012 07:39 AM
Hello, I'm having a problem. I configured on Phone and Modem windows to add 9 on the dialing rules and selected cisco adapter on dialing options in Outlook. So, it's actually working in Outlook contacts, automatically appends the 9 before the number. However, the problem is on IE toolbar or direct dialing when entering a number in the call connector window is not appending the 9 before the number as it does in Outlook, so is not dialing out. Is possible to fix this? Thank you
06-18-2012 04:23 PM
Daniel,
Thanks for clarifying this I will check this out and let you know how it goes.
06-26-2012 06:16 AM
I tried setting the 9 but it does not add the 9 to the number on Outlook, I finally had to add a 9 before dialing out.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide