02-08-2011 09:21 PM - edited 03-21-2019 03:39 AM
Hi team,
Are there any plans to support Enhanced MoH on the UC500 platforms? Whereby multiple MoH sources can be referenced simultaneously for different departments.
Thanks.
Solved! Go to Solution.
02-26-2013 06:00 AM
I know I'm a little late to this discussion but you can already do this on a UC500 using MOH groups. See the article below on configuring them. It does require some familiarity with using the command line. However I would say those skills are worth having as you can get so much more out of your PBX using the command line rather than the very limited CCA
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemoh.html#wp1022742
02-09-2011 03:23 AM
Anna T (CCA PM) has this on the feature list so it's just a matter of prioritization.
02-26-2013 06:00 AM
I know I'm a little late to this discussion but you can already do this on a UC500 using MOH groups. See the article below on configuring them. It does require some familiarity with using the command line. However I would say those skills are worth having as you can get so much more out of your PBX using the command line rather than the very limited CCA
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemoh.html#wp1022742
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide