07-13-2011 03:37 AM - edited 03-21-2019 04:21 AM
Hello All,
Could smeone please tell me ,"How to disable Extension Mobility on CME 8.0 and to reboot all my Cisco IP Phones 7941"?
I have done "no voice logout-profile 1" on each phones , still i could not return to my formal setting.
I reset the phone with 123456789*0# ,but no result.
I would be glad on your support
Thanks
David
07-13-2011 06:03 AM
David,
You may need to give each phone a username and password, under the ephone. And also make sure there is a button assignment for each ephone. Then you many need to delete and recreate the CNF files. Would need to see your config if it is still not working.
Thank you,
Darren
07-13-2011 08:26 AM
Thanks Darren ,
I was about to locate the problem with Extension Mobility ,with " no logout-profile " and assign button to each phone .
But one of the IP Phone I want to reset factory setting is not working .
Could you please confirm, how long does it take for factory reset ? This Phone has been trying to get details from CME since 2 hours now.
Thanks
DaK
07-13-2011 08:43 AM
Dak,
Not sure exactly how long to factory reset a 7941, but definitely less than 2 hours.. Maybe 5 minutes would be normal..
Thank you,
Darren
07-13-2011 10:23 PM
Hello,
I checked it this morning still not set to Factory reset. Could You advice on what to do ?
Could you check this Extension Mobility id it is okay ?
voice logout-profile 1
pin 1111
user XXXX password YXYXYX
number 2101
number 2102
number 2103
number 2104
number 2105
number 2106
speed-dial 1 2100 label "2100"
voice user-profile 1
pin 1111
user YYYYY password XYXYXY
number 2101
number 2102
number 2103
number 2104
number 2105
number 2106
speed-dial 1 2100 label "2100"
ephone-dn 6
number 1101 secondary 2100 no-reg both
label line 1
description Mr A - 2101
name Mr A
call-forward noan 904567789 timeout 15
ephone 1
description A
mac-address 001C.58xx.xxx.x.
username Mr.A password AXXX
fastdial 1 0049575844 name Home
speed-dial 1 0049575844 label "Home"
type 7971
button 1:6
pin 121234
logout-profile 1
ephone-dn 7
number 2102 no-reg both
label line 1
description Mr B - 2102
name Mr B
call-forward noan 903456789 timeout 1
ephone 2
description MrB Desktop Phone
mac-address 1xX.Xxx.ccx
ephone-template 1
type CIPC
button 1:14
logout-profile 1
.
.
.
.
.
.
ephone-dn 12
number 2106 no-reg both
label line 1
description Mr.F - 2106
name Mr.F
ephone 6
description Mr.F
mac-address 001B.XXX.xXXX
ephone-template 1
type 7941
button 1:93
night-service bell
logout-profile 1
07-14-2011 06:18 AM
Hello Daren
Hello All,
The Cisco IP Phone C-7941G still the same since 24hours. I check switch and CME connected to IP Phone, I received this error message
Re: %IP_SNMP-3-SOCKET: can't open UDP socketing
%IP_SNMP-3-SOCKET: can't open UDP socket on port 161
07-15-2011 07:00 AM
Davy,
I am not sure why your phone is not coming up, but I do not believe that it has anything to do with extension mobility. Here is some information on configuring extension mobility though CLI, if you are not using CCA. If you are using CCA, just edit that phone, and remove the extension mobility check box.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemobl.html
Thank you,
Darren
07-15-2011 12:10 PM
Thanks,
It was a software problem and I have replaced it with another phone.
Cheers,
07-15-2011 08:45 AM
Hello Guys,
This is the right way to configure Extension Mobility (EM):
(1) First, do this on CME( config) mode
Ip http server
telephony-service
url authentication http://
(2)
voice logout-profile 1
user
number 5000 type normal
speed-dial 1 5000 label 5000 ! >>>> This will be the number that shows on your IP Phone<<<<
(3) ..Depend on number of people in a group ,( If you have 10 people in a group ,you need 10 of User-profile)
voice user-profile 1
user < A> password
number 5001 type normal
voice user-profile 2
user password
number 5002 type normal
voice user-profile 3
user
number 5003 type normal
exit
voice user-profile 4
user
number 5004 type normal
exit
voice user-profile 5
user
number 5005 type normal
exit
voice user-profile 6
user
number 5006 type normal
exit
(4) Assign logout-profile to each Ephones ( This must equal number User-profile)
ephone 1
logout-profile 1
ephone 2
logout-profile 1
ephone 3
logout-profile 1
ephone 4
logout-profile 1
ephone 5
logout-profile 1
ephone 6
logout-profile 1
Then save it you are Done !!!
HTH
DAK
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide