Here is how to RELOAD ONLY CUE if you find you need to using CCA 2.2.5 (click to improve picture)
There have been a few inquiries on how to change the time of day that the EEM script reloads CUE. The script that Steve mentions reloads the CUE everyday at 4AM.
event manager applet cue_reset
event timer cron cron-entry "0 4 * * *"
action 1 cli command "enable"
action 2 cli command "service-module integrated-Service-Engine 0/0 reset" pattern "confirm"
action 3 cli command "y"
To change the time of day when this script executes modify the "event timer" configuration line. Here is a description of the different parameters-
http://www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_06.html#wp1157622
cron-entry
Text string that consists of five fields separated by spaces. The fields represent the times and dates when CRON timer events will be triggered. Fields and corresponding values are as follows:
–
minute—A number in the range from 0 to 59 that specifies when a CRON timer event is triggered.
–hour—A number in the range from 0 to 23 that specifies when a CRON timer event is triggered.
–day-of-month—A number in the range from 1 to 31 that specifies the day of the month when a CRON timer event is triggered.
–month—A number in the range from 1 to 12 or the first three letters (not case-sensitive) of the name of the month in which a CRON timer event is triggered.
–day-of-week—A number in the range from 0 to 6 (Sunday is 0) or the first three letters (not case-sensitive) of the name of the day when a CRON timer event is triggered.
