Voice Systems and Accessories - Small Business

Trying to program my phone while on a call for recording the phone call.How might I go about doing this. Tried below but this is not working.I need the phone to basically dial *1 to start recording the call, but when I press this option its asking fo...

Is there a way to pass a didn=xxx reference into an SPA8000 (similar to the SPA9000) to select a specific ATA channel on the device ?On the SPA9000 if you pass in an addidional SIP parameter eg  "x-To: dnid=xx" your inbound will get routed to xxJust ...

I ofter forward the calls to another number directly from the Telecom line with *21* etc. I tried various ways to create a dial plan but it doesn't work.Is there a way to do this?Thanks to all Roberto Ercolano

Hello,I currently have a SPA9000+SPA400+5 SPA 942 phones. I am running an analog setup, using 4 PSTN lines, when I press 9 and dial the number there is a delay of about 5 seconds before the phone starts to dial out. Is there any way to shorten this d...

Hello.I am not very familiar with the Cisco SPA IP phone but i am researching an issue for my customer who is using SPA 303, 504G, 509G, 525GMy 1st and main question is how can i configure my customers SPA IP phones to advertise "G.729" in the SIP SD...

Is there a updated OOB guide for 3.0 CCA tool?I tried these links and all are not working.  Where is a OOB?CCA 2.2:  http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_assistant/version2_2_1/out_of_band_reference/cca_r22_oob_config_guidelin...

I am using a UC520 at a small business.  I need to change the auto attendant 1 to have a new *.wav file for button 3.  This gives a list of employee extensions and 2 people have left and I need to get them out of the list. I have the AA Script set at...

I have a big problem about language dictionary and its download from network. I have to install several SPA504G in a bank with a SIP PABX. The bank doesn't give me access to the internet and to any PC in the LAN for security reason. What I can I do w...

Hello,I completely agree that the latest CCA release allows you to do most if not all configuration tasks on a UC500 from the tool.  However, there are still a couple of things that you might want to do via the CLI.Is this supported or not? There use...

Hi!We had been running a PAP2-NA unit without problems for quite a while. Last week it started rebooting after every 5-6 seconds and keeps logging the followings:Jan  1 12:00:00 001217FD2269 System started: ip@192.168.6.5, reboot reason:H736c0041Jan ...

Can anyone tell me why the extenion port field would be disable?See the attached image.Restored everything to factory yesterday.I'm 99% sure I was able to assign an FXS port to an extension when changing the role to "User Type" prior to the rebuild.

'm attempting to factory reset a UC560 and running into all kinds of issues...I've tried the below steps on both a Win7 Laptop and WinXP VM (firewall off and other  NICs disabled) all running CCA 2.1 (2).From the Maintenance -> Restart/Reset menu, I'...