07-22-2012 09:18 AM - edited 03-21-2019 09:49 AM
The firmware update upg-spa2102-5-2-13.exe doesn't work.
Error: Run-Time Check Failure #2 - Stack around the variable 'strNc' was corrupted.
Solution:
You have to remove (blank) the admin and user password before starting the update. Put them back after.
Only firmware 5.2.13 is affected.
11-17-2012 04:27 PM
Same here
Windows XP
SPA2102
Software Version:5.2.12
11-18-2012 05:10 PM
I'm getting the exact same error here, too.
Windows 7
SPA2102
Trying to upgrade from Version 5.2.12 to 5.2.13
01-11-2014 03:03 AM
Hi, where you able to apply the update to latest firmware? I go the exam same problem (C++ error blablabla... )
01-13-2014 12:51 AM
You can try a provisioning update method.
Enable a web server or tftp server on your PC (e.g. 3C Daemon), put the firmware file in the server directory and use one of these urls in your browser:
http://SPA_IP_ADDRESS/admin/upgrade?http://YOUR_WEB_SERVER_IP/SPA_FIRWARE.bin
or
http://SPA_IP_ADDRESS/admin/upgrade?tftp://YOUR_TFTP_SERVER_IP/SPA_FIRWARE.bin
Regards.
01-13-2014 04:34 PM
Solution:
You have to remove (blank) the admin and user password before starting the update. Put them back after.
Only firmware 5.2.13 is affected.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide