10-04-2012 01:39 PM - edited 03-21-2019 06:23 AM
I need to upgrade my SPA525G to the latest firmware so I can use VOIP, whatever I try it will not update, I think it may have crashed during the process, how can I completely reset this, is their any possibility?
Thanks
10-04-2012 08:41 PM
Hi Mark,
Do you want to load the SIP firmware on there? Or what do you mean by you want it to do VOIP??
Cheers,
David Trad.
10-04-2012 11:13 PM
Hi Mark,
It is not quiter clear what you need it for but if you have firmware 7.4.3 or any other before 7.4.7 please update first to 7.4.7 and then to 7.5.3.
HTH,
Alex
*Please rate helpful posts
10-05-2012 10:44 AM
for my understanding, the phone is crashed during upgrade.
if that is the case, basically It should come back automatically with the backup firmware, but..
See if you can get to the following
1. Cold reboot the phone
2. When the animation appears
3. Press speaker key 3 times
4. will be show a list of menu, from there
a. could reset the configuration
b. Upgrade the firmware
10-08-2012 02:50 PM
Thank you for your reply, I did as you suggested but couldnt see any menu.
10-08-2012 03:08 PM
you should see the recovery menus at least. if not, better open a case for further assistant.
diag recovery
1. recovery reset
2. firmware upgrade
3. restart.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide