cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1803
Views
5
Helpful
4
Replies

SPA9xx and SPA5xx LDAP Lookup for Inbound Calls

ryan-glenn
Level 1
Level 1

Hi,

Does SPA9xx and SPA5xx support LDAP lookups for inbound calls? If the phones supports it, what settings need to be configured for this. If not, are there any plans in the future for this feature to be supported on these phones?

1 Accepted Solution

Accepted Solutions

Alberto Montilla
Cisco Employee
Cisco Employee

Hi Ryan-Glenn;

The feature is currently not supported for inbound, it works for outbound only. It is not in the short term roadmap.

Regards
Alberto

View solution in original post

4 Replies 4

Alberto Montilla
Cisco Employee
Cisco Employee

Hi Ryan-Glenn;

The feature is currently not supported for inbound, it works for outbound only. It is not in the short term roadmap.

Regards
Alberto

CTRLITINC
Level 1
Level 1

Ryan,

The only way I know to do this would be to use Call Ctrl which will screen pop inside Windows for all incoming phone calls. There is support for LDAP and XML shared directory. This does require the additional software, but the only way I know how to accomplish your requirement.

Steve Wofford

www.uctrlit.com/CallCtrl

Call Manager for SPA IP Phones

Totaly_FuRy
Level 1
Level 1

This is a very good feature to add on the roadmap !

I have a growing fleet of 7800 cisco SPA500 and this feature will make my dream come true ^^