08-15-2012 07:19 AM - edited 03-21-2019 06:09 AM
Hello,
Can anybody help me, with this:
I have UC520 and bunch of SPA 942 phones. How make them work? And is it possible at all?
-
Best regards,
Damir
Solved! Go to Solution.
08-15-2012 12:56 PM
Hello Damir,
The SPA900 phones are only compatible with SIP, so you would have to configure SIP on the UC in order to register the SPA942 phones.
Please refer to this post for some sample SIP configurations: https://supportforums.cisco.com/message/3330441
Thanks,
-john
View solution in original post
