cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1941
Views
5
Helpful
4
Replies

UC520 with SPA942

damir4a10
Level 1
Level 1

Hello,

Can anybody help me, with this:

I have UC520 and bunch of SPA 942 phones. How make them work? And is it possible at all?

-

Best regards,

Damir

1 Accepted Solution

Accepted Solutions

Hello Damir,

The SPA900 phones are only compatible with SIP, so you would have to configure SIP on the UC in order to register the SPA942 phones.

Please refer to this post for some sample SIP configurations: https://supportforums.cisco.com/message/3330441

Thanks,

-john

View solution in original post

4 Replies 4

johschaf
Level 4
Level 4

Hello Damir,

Unfortunately, the SPA900 series phones are not supported with the UC500 platform.

You can find information regarding supported phones at the following links:

https://supportforums.cisco.com/docs/DOC-9827

http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_assistant/version3_2_1/release/Notes/cca_3_2_1_relnotes.html#wp311445

Thanks,

-john

John,

Thank you very much for your answer.

Yes you are right, UC500 series are not oficially supported. The problem is - we already have UC520 and phones, so we have nothing to lose. With all this in mind, I wonder may be someone had experience to make it work with some sort of custom firmware or... you know

Hello Damir,

The SPA900 phones are only compatible with SIP, so you would have to configure SIP on the UC in order to register the SPA942 phones.

Please refer to this post for some sample SIP configurations: https://supportforums.cisco.com/message/3330441

Thanks,

-john

John,

Thanks a lot! That link is what we need. I hope configuration examples will help us

-

Best regards,

Damir